[ANGULAR] Migrating from 4.0.0 to 4.2.2 - New behavior on events

[eyvind]

Hi,

I just upgraded from Scheduler 4.0.0 to 4.2.2. Most things work as they used to, but I have discoverd at least two things that are "new":

1. When I create a new event through drag or right-click, the event is shown with a name LObject.newEvent. Before, it was empty.

   

2. If I close the event editor the event remains in the scheduler. With 4.0.0 the event was not added to the event store unless I explicitly added it.

Which changes do I need to apply in order to retain the same behavior I had with 4.0.0?

Thanks for the help!

[alex.l]

Please, make sure you upgraded all files and read our upgrade guides here:

https://bryntum.com/docs/scheduler/#Scheduler/guides/upgrades/4.0.4.md
https://bryntum.com/docs/scheduler/#Scheduler/guides/upgrades/4.0.8.md
https://bryntum.com/docs/scheduler/#Scheduler/guides/upgrades/4.1.0.md
https://bryntum.com/docs/scheduler/#Scheduler/guides/upgrades/4.1.1.md
https://bryntum.com/docs/scheduler/#Scheduler/guides/upgrades/4.1.3.md
https://bryntum.com/docs/scheduler/#Scheduler/guides/upgrades/4.1.4.md
https://bryntum.com/docs/scheduler/#Scheduler/guides/upgrades/4.2.0.md

After you did all steps recommended in our guides, please test it again. I cannot replicate any of 2 problems you mentioned.
Tried here: https://bryntum.com/examples/scheduler/basic/

If our guides won't help, please attach a test case that we could run and reproduce problem(s) you have.

All the best,
Alex